Car Mechanic Simulator 2021 – Emden Jager – Order 13
Car Mechanic Simulator 2021, Game Guides /
15 Feb 2021
/
Emden Jager
During the repair of Emden Jager, you will need to complete these steps:
Note: Parts are listed for quick access.
This is a tough one, especially with “Increase tuning of a car by 10-15%”.
- YOU DO NOT NEED THE DYNO TO FINISH THIS JOB.
- Air Filter (I4 B)
- Belt Tensioner
- 2x Brake Pads
- Camshaft (I4 SOHC)
- 2x Front Drive Axle H
- Front Drive Shaft
- Fuel Filter
- Oil Filter (I4)
- 4x Rim Retro (13″) ET:0
- 4x Standard Tire B (175/70R13)
- Serpentine Belt (I4 SOHC)
- Serpentine Belt A
- 4x Spark Plug
- Timing Belt (I4 SOHC)
- Front Right Door
- Front Right Fender
- Hood
- Change oil
- Spray car with factory paint
- Change Brake and Power Steering fluid
- Perform Wheels alignment
Increase the tuning of a car by 10-15%
You don’t need to increase horsepower or torque; instead, you should focus on improving the car’s tuning. The tuning contributions of these parts add up to 13.5%, which should be sufficient to complete the job. However, the tuning increase won’t register as completed until the engine has been reassembled.
The following parts contribute to the increase in tuning:
- Alternator (1.5%)
- Engine Head (I4 SOHC) (5%)
- Intake Manifold (I4 MPI) (1.25%)
- Camshaft (I4 SOHC) (2.75%)
- Fuel Rail MPI (3%)
How to Edit Save Files in Car Mechanic Simulator 2021 (Cheat)
I put in way more than just those 5 items using performance parts but the task is still marked uncompleted. Any suggestions?
I did the same, you need to take all the extra items out and just use the ones listed. Basically, from what I can determine putting in the extra puts you over 15% which is a failure.